14 Setup
Connectingto the video recorder by SCART connector
Plug one end of the SCARTcable into the VCR socket on the
digital receiver. Then, plug the other end of the SCART ca-
ble into the input SCART socket on your video recorder if
you wish to record a broadcasting programwith your video
recorder; otherwise if you wish to watch the video that the
video recorder plays back just through the digital receiver,
plugthe other end into the output SCART socket.
2.5 Inserting batteries in the remote control
Toinsert the batteries, open the battery compartment by re-
movingthe lid, and then insert the batteries observing the po-
larity, which is marked on the base of the battery compart-
ment. Close the battery compartment after that.
Ifthe digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
usedbatteries. Themanufacturer accepts no liability for dam-
ageresulting from leaking batteries.
NOTE Batteries,including those which contain no heavy met-
als, may not be disposed of with household waste.
Pleasedispose of used batteries in an environmentally
sound manner. Find out about the legal regulations
whichapply in your area.