52Recording and Playing
7.Select the Save command, then the block is stored. The stored file will named after its source file with a suffix of ‘CUT’ and a number
In addition, you can copy a recording file in whole or in part when playing back it.
1.Start playback of a recording file you want.
2.Find a desired position from which a copy will be started
with 
button or 
button.
3.Press 
button.
4.Pressing 
button stops copying. The copied file will be named after its source file with a suffix of ‘COPY’ and a number.
Once a copy is started, a copying symbol like the Circle next figure will be displayed on the right top of the
screen for a few seconds. To see copying status, press 
button. The outer circle of the copying symbol indicates
progress rate.
NOTE If copying time is less than about 1 minute, the copy- ing will not be done successfully. It is recommended not to change the playback speed.
7.5 Playing a MP3
To play a MP3 file with the digital receiver, you have to trans- fer your MP3 files to the digital receiver from your personal computer. For how to transfer your MP3 files to the digital receiver, refer to § 10.3 or Chapter 9.
To play a MP3 file, perform the following steps:
1.Press 
button, and then press 
button or 
button to display the MP3 file list.
