2.2Safety precautions 9
2.2 Safety precautionsPlease read and keep the following safety precautions care-
fully.
•The power must be 90 to 250 volt. Check it before con-
necting the digital receiver to the wall outlet. For the
power cunsumption of the digital receiver, referto Ta-
ble2.1.
•Thewall outlet shall be installed near the equipment and
shallbe easily accessible.
•The digital receiver is designed to receive, record and
playback video and audio signals. Anyother use is ex-
presslyprohibited.
•Whensetting up the digital receiver, make sure it is in a
horizontalposition.
•Do not expose the digital receiverto any moisture. The
digital receiveris designed for use in dry rooms. Ifyou
douse it outdoors, ensure that it is protected from mois-
ture, such as rain or splashing water. Do not place any
vesselssuch as vases on the digital receiver. Thesemay
beknocked over and spill fluid on the electrical compo-
nents,thus bring about a risk.
•Useonly dry cloth when cleaning the digital receiver.
•Do not place the digital receiver close to heating units
or in direct sunlight, as this will impair cooling. Place
the digital receiver on a hardand level surface. Do not
layany objects such as magazines on the digital receiver.
Whenplaced in a cabinet, make sure there is a minimum
space of 10cm around it. Forthe physical specification
ofthe digital receiver, refer to Table 2.2.
•Protectthe power cord from being walked on or pinched
particularly at plugs, receptacles and the point where