7.4Editing a recording 51
7.4 Editing a recording7.4.1 Toerase a block from a recording
Youcan cut out a block such as commercial film from a record-
ingfile by performing the following steps:
1. Startplayback of a recording file you want.
2. Press buttonto display a progress bar.
3. Find one end position of a block you want to specify
with buttonor button.
4. Press button at the position, then the pointer starts
toblink.
5. Findthe other end postion.
6. Press button at the position again, then a confirma-
tionbox appears.
7. Selectthe Cut command, then the block is erased.
7.4.2 Tostore a block from a recording
Youcan store a block from a recording file by performing the
followingsteps:
1. Startplayback of a recording file you want.
2. Press buttonto display a progress bar.
3. Find one end position of a block you want to specify
with buttonor button.
4. Press button at the position, then the pointer starts
toblink.
5. Findthe other end postion.
6. Press button at the position again, then a confirma-
tionbox appears.