Lanier LD075 Covers, If you selected 1-1, 1-2,…, Front Cover, To change settings after press

Copying

F Press the [Total Pages] key, and then use the number keys to enter the total number of original pag- es, then press the {#} key.

	G Press the [OK] key.
2	Note
	❒ To change settings after press-

ing the [OK] key, press the right bottom [Change] key, and then enter the numbers again.

If you selected (1–1, 1–2,…)

A Press the right bottom [Change] key.

B Press the [First Printing Page] key, and then use the number keys to enter the original sheet number to start numbering from.

Note

❒To change the number entered,

press the [Print Inquiry List] or

{Clear/Stop} key, and then enter a new number.

C Press the {#} key.

D Press the [First Chapter No.] key, and then use the number keys to enter the chapter number to start numbering from, then press the {#} key.

E Press the [Numbering from/to] key, and then use the number keys to enter the page number to start numbering from, then press the {#} key.

F Press the [OK] key.

G If page designation is complete, press the [OK] key.

Covers

Using this function, you can add cov- er sheets or designate certain pages to be copied on slip sheets.

Preparation

Before selecting this function, set the tray for the front cover paper. ⇒“Cover Sheet Tray” in the Gen- eral Settings Guide

Note

❒The cover sheet should be the same size and direction as the copy pa- per.

❒You cannot set copy paper in the bypass tray. Only set cover sheets in the bypass tray.

❒When selecting [Copy], select whether the front and back covers

are copied 1-sided or 2-sided. ⇒“Cover Sheet Tray” in the Gen- eral Settings Guide

Reference

To set paper when using the inter- poser, see “Loading Paper in the Interposer” in the General Settings Guide.

❖Front Cover

The first page of your originals is copied on a special cover paper, or a cover sheet is inserted before the first copy.

72