Lanier LD075 Changing stamp position, size and density, Stamp Position and Original Direction

Copying

Stamp Position and Original Direction

2

GCSTMP5E

Note

❒You cannot use the bypass tray with this function.

❒Only one message can be stamped at a time.

Reference

⇒p.104 “Stamp Language”

⇒p.104 “Stamp Position”

⇒p.104 “Stamp Format”

A Press the [Edit/Stamp] key.

C Press the [Preset Stamp] key. D Select the desired message.

E Press the [All Pages] or [1st Page on- ly] key to select the print page.

Note

❒You can change the position,

size, and density of the stamp. ⇒ p.64 “Changing stamp posi- tion, size and density”

F After you specify all the desired settings, press the [OK] key.

G Press the [OK] key.

H Place your originals, and then press the {Start} key.

Changing stamp position, size and density

A Press the [Change] key.

B Select the position for print, size and density, then press the [OK] key.

B Press the [Stamp] key.

64