Lanier LD075, LD060 Accessing User Tools Copy/Document Server Features, Exiting From User Tools

User Tools (Copy/Document Server Features)

Accessing User Tools (Copy/Document Server Features)

This section is for key operators in charge of this machine. You can change default settings.

Note

❒Be sure to exit from User Tools af- ter all settings are finished.

❒Selected keys are highlighted.

❒Any changes you make with User Tools remain in effect even if the main power switch or operation

	switch is turned off, or the {Clear
5	Modes} key is pressed.
	Reference

For details, see "User Tools (Sys- tem Settings)" in the General Set- tings Guide.

B Press the [Copier/Document Server Features] key.

The Copier/Document Server Fea- tures menu appears.

C Select the menu you want to set.

Setting screens for each menu will be displayed.

Reference

⇒p.89 “User Tools Menu (Cop- ier/Document Server Fea - tures)”

D Change settings by following the instructions on the display panel, and then press the [OK] key.

A Press the {User Tools/Counter} key.	Exiting From User Tools
User Tools Main Menu appears.	A After changing User Tools set-
	tings, press the [Exit] key on the
	User Tools Main Menu.
	User Tool changes are complete,
	and the machine is ready to copy.
ZGVS010E

Note

❒When the access code is set, the

access code input screen is dis- played when changing the ini- tia l settings . Op er ate by entering the registered access code beforehand. For access code, see “Key Operator Tools” in the General Settings Guide.

Note

❒You can also exit from User Tools by pressing the {User Tools/Counter} key.

96