Lanier LD060 Edit 1/2, Front Margin Left/Right, Back Margins Left/Right, Front Margin Top/Bottom

Accessing User Tools (Copy/Document Server Features)

Edit 1/2

❖Front Margin : Left/Right

You can specify left and right mar- gins on the front side of copies in Margin Adjust mode.

Note

❒You can enter a margin width of between 0 and 30 mm in 1 mm increments (0” and 1.2” in 0.1” steps) with the number keys.

❖Back Margins : Left/Right

You can specify left and right mar- gins on the back side of copies in Margin Adjust mode.

Note

❒You can enter a margin width of between 0 and 30 mm in 1 mm increments (0” and 1.2” in 0.1” steps) with the number keys.

❖Front Margin : Top/Bottom

You can specify top and bottom margins on the front side of copies in Margin Adjust mode.

Note

❒You can enter a margin depth of between 0 and 30 mm in 1 mm increments (0” and 1.2” in 0.1” steps) with the number keys.

❖Back Margin : Top/Bottom

You can specify top and bottom margins on the back side of copies in Margin Adjust mode.

Note

❒You can enter a margin depth of between 0 and 30 mm in 1 mm increments (0” and 1.2” in 0.1” steps) with the number keys.

❖1 sided→2 sided Auto Margins:T to T

In 1 sided → 2 sided Duplex mode, you can specify the margins on the back side.

Note

❒You can enter a margin width of between 0 and 30 mm in 1 mm increments (0” and 1.2” in 0.1” steps) with the number keys.

❖1 sided→2 sided Auto Margins :T to B

In 1 sided → 2 sided Duplex mode, you can specify the margins on the back side.

Note

❒You can enter a margins depth

of between 0 and 30 mm in 1 5

mm increments (0” and 1.2” in 0.1” steps) with the number keys.

❖Erase Border Width

Specify the width of erased border margins using this function.

Note

❒You can enter a width of be- tween 2 and 99 mm in 1 mm in- crements (0” and 1.2” in 0.1” steps) with the number keys.

❖Erase Original Shadow in Combine

In Combine Copy mode, you can erase a 3 mm, 0.1" boundary mar- gin around all four edges of origi- nals.

❖Erase Center Width

You can specify the width of the erased center area using this func- tion.

Note

❒You can enter a width of be- tween 2 and 99 mm in 1 mm in- crements (0” and 1.2” in 0.1” steps) with the number keys.

101