Lanier LD075, LD060 Changing the stamp position, Specify the first printing page and start number

Copying

A Press the [Edit/Stamp] key.

2

B Press the [Stamp] key.

C Press the [Page Numbering] key.

D Select the format.

Note

❒You can specify the stamp posi-

tion, pages to be stamped, and numbering. ⇒ p.70 “Changing the stamp position”⇒ p.70 “Specify the first printing page and start number”

E After you have made all desired settings, press the [OK] key.

F Press the [OK] key.

G Set the originals, then press the {Start} key.

70

Changing the stamp position

A Press the left bottom [Change] key.

B Select the desired position, and then press the [OK] key.

Specify the first printing page and start number

If you selected (P1,P2…, -1-,-2-…, P.1, P.2…, 1, 2…, )

Note

❒Below gives an example based on when (P1, P2...) is selected. The steps are the same for other cases.

A Press the right bottom [Change] key.

B Press the [First Printing Page] key, and then use the number keys to enter the original sheet number to start numbering from.

Note

❒To change the number entered,

press the [Print Inquiry List] or

{Clear/Stop} key, and then enter a new number.