Lanier LD060, LD075 manual Center/Border Erase, H Press the OK key, A Press the Edit/Stamp key

Copy Functions

H Press the [OK] key.

I Place your originals, and then press the {Start} key.

Center/Border Erase

A Press the [Edit/Stamp] key.

Selecting [Diff. Width]

APress the [Diff. Width] key.

2

B Press the [Erase] key.

C Press the [Erase Center/Border] key. D Press the [Center/Border] key.

E Set the border to be erased.

Selecting [Same Width]

APress the [Same Width] key.

B Press the [Center] key, and then set the erase center width with the [n] and [o] keys.

CPress the [Border] key, and then

set the erase border width with the [n] and [o] keys.

DPress the [OK] key.

B Press the key for the part you wish to change, and then set an erase margin width with the [n] and [o] keys.

CPress the [OK] key.

F Press the [2-sided Setting] key and the [Back Side] key.

Note

❒If you don't need to erase the center or border from the back of the original, go to step H.

G Set the center or border to be erased from the back.

Note

❒Erasing the center or border from the back is valid only when you copy 2-sided origi- nals.

H Press the [OK] key.

I Place your originals, and then press the {Start} key.

59