Lanier LD075 manual Placing Custom Size Originals, Place into the document feeder 2. Vertical size

Placing Originals

C Align the rear and left edges of originals as shown in the illustra- tion.

1
1	B4	A3
		2

CP19AE

1.Place into the document feeder.

2.Vertical size

D Adjust the guide to the widest original size.

E Place aligned originals face up into the document feeder.

F Press the {Start} key.

Placing Custom Size Originals

When placing custom size originals in the document feeder, specify the size of the originals.

Note

❒Paper that has a vertical length of 128–297 mm (5" – 11") and a hori- zontal length of 128–1260 mm (5" – 49.6") can be placed with this func- tion.

A Press the [Special Original] key.

C Enter the horizontal size of the original with the Number keys, and then press the [#] key.

Note

❒If you make a mistake, press the

[Print Inquiry List] or {Clear/Stop} key, and then enter the value again.

D Enter the vertical size of the origi- nal with the Number keys, and then press the [#] key.

E Press the [OK] key.

F Place originals, and then press the

{Start} key.

B Press the [Custm Size Origi.] key.

16