Lanier LD060, LD075 manual Size Magnification, Directional Magnification %

Copy Functions

Size Magnification

This function calculates an enlarge- ment or reduction ratio based upon the lengths of the original and copy.

A mm a mm

Note

❒Measure and specify the lengths of the original and copy by compar- ing "A" with "a."

A Press the [Reduce/Enlarge] key.

B Press the [Specifd. Ratio] key.

C Make sure the [Size Magnification] key is highlighted.

D Enter the length of the original with the number keys, and then press the [#] key.

Note

❒You can enter sizes within the following ranges.

Metric	1 – 999 mm (in 1 mm steps)
version
Inch	0.1" – 99.9" (in 0.1" steps)
version

E Enter the length of the copy with the number keys, and then press the [#] key.

Note

❒To change the length after pressing the [#] key, select [Orig-

inal] or [Copy] and enter the de-	2
sired length.

F Press the [OK] key.

G Press the [OK] key.

H Place your original, and then press the {Start} key.

Directional Magnification (%)

Copies can be reduced or enlarged at different reproduction ratios, hori- zontally and vertically.

a:Horizontal ratio

b:Vertical ratio

Note

❒You can also select a preset ratio that is close to the desired ratio us-

ing [Reduce] or [Enlarge], then ad- just the ratio with the [n] or [o] keys.

33