Lanier LD060 When copying onto standard size paper, When copying onto custom size paper, Extender

Copying from the Bypass Tray

A Open the bypass tray.

B Insert copy paper with the side you want to copy facing up, pus- ing until you hear the beep, and then align the paper guide to the paper size.

1.Extender

Note

❒If the guides are not flush against the paper, images might be skewed or misfeeds might occur.

❒Do not stack paper over the lim- it mark, otherwise images might be skewed or paper mis- feeds might occur.

❒Swing out the extender to sup-

port paper sizes larger than A4L, 81/2" ⋅ 11"L.

❒Fan paper to get air between the sheets and avoid multi-sheet feed.

C Select the type and size of the pa- per.

When copying onto standard size paper

A Press the {#} key.

B Press the [Select Size] key. 2

C Select the paper size.

DPress the [OK] key.

When copying onto custom size paper

A Press the {#} key.

B Press the [Custom Size] key.

C Press the [Vertical mm] key, en- ter the vertical size of the paper with the number keys, and then press the [#] key.

D Enter the horizontal size of the paper with the number keys, and then press the [#] key.

Note

❒If the [Horiz mm] key is not highlighted, press the [Horiz mm] key.

❒To register the custom size entered, press the [Program] key and then press the [Exit] key.

EPress the [OK] key.

23