Lanier LD075, LD060 Auto Start, Interrupt Copy, Original Beeper, When the machine keeps copying

Copying

Auto Start

Copy starts automatically when the machine is ready.

A Set the copy contents while “Se- lect copy mode and press {Start}”

2 and “Scanning originals can be started” are displayed alternately.

B Set the original.

C Press the {Start} key.

The machine scans the original. When the machine is ready, it starts copying automatically.

Interrupt Copy

Use this function to interrupt a long copy job to make urgently needed copies.

A Press the {Interrupt} key.

ZGVS020E

C When the copy job is finished, remove originals and copies.

D Press the {Interrupt} key again.

The Interrupt indicator goes off.

E When the display prompts you, set the remaining origi- nals again before interrupting.

F Press the {Start} key.

Note

❒By pressing the {Start} key, the previous copy job set- tings will be restored and the machine will continue copy- ing from where it left off.

When the machine keeps copying

A Place the originals you wish to copy.

B Press the {Start} key.

The machine stops the other original job and starts copying your original.

C When copying is complete, re- move the originals and copies.

D Press the {Interrupt} key again.

The Interrupt indicator goes off.

The previous copy job settings will be restored and the ma- chine will continue copying from where it left off.

When the originals stop scanning

A Remove originals that have been copied and place origi- nals you wish to copy.

B Press the {Start} key.

The machine starts making your copies.

Original Beeper

The beeper sounds and an error mes- sage is displayed when you leave the originals on the exposure glass after copying.

Reference

⇒p.99 “Tone: Original remains”

18