Lanier LD075, LD060 manual Duplex, Combine, Finisher 3000B100-sheet staples

Specifications

❖Finisher 3000B(100–sheet staples)

Punch unit type
2 & 4 holes type	2 holes	L	A3–A5, 11" ⋅ 17"–51/2" ⋅ 81/2"
		K	A4–A5, 81/2" ⋅ 11", 51/2" ⋅ 81/2"
	4 holes	L	A3, 11" ⋅ 17"
		K	A4, 81/2" ⋅ 11"
4 holes type	4 holes	L	A3–B5, 11" ⋅ 17"–81/2" ⋅ 11"
		K	A4–A5, 81/2" ⋅ 11", 51/2" ⋅ 81/2"
2 & 3 holes type	2 holes	L	A3–A5, 11" ⋅ 17"–51/2" ⋅ 81/2"
		K	A4–A5, 81/2" ⋅ 11", 51/2" ⋅ 81/2"
	3 holes	L	A3, B4, 11" ⋅ 17"
		K	A4, B5, 81/2" ⋅ 11"

❖Duplex

You cannot use the following copy paper with this function:

•Paper smaller than A5, 51/2" ⋅ 81/2"

6 • Paper thicker than 127.9 g/m2, 34 lb.

•Paper thinner than 64 g/m2, 17 lb.

•Translucent paper

•Label paper (adhesive labels)

•OHP transparencies

•Postcards

When an odd number of originals is set in the optional document feeder, the back of the last page is blank. During copying, the image is shifted to allow for the binding margin.The image quality of the front and back of copies might be different.

❖Combine

•If the calculated ratio is under the minimum ratio, it is adjusted to within available range automatically. However, with some ratios, parts of the im- age might not be copied.

•You cannot use custom size paper.

•In this mode, the machine selects the ratio automatically. This ratio de- pends on copy paper size and the number of originals.

•The reproduction ratios you can specify are 25 – 400%.

•If the direction of originals is different from that of the copy paper, the ma- chine will automatically rotate the image by 90° to make copies properly.

120