Lanier LD060 Copying, Basic Procedure, Initial copy display, How to Operate, To confirm settings

2. Copying

Basic Procedure

A When the machine is set for user codes, enter a user code (up to 8 digits) with the number keys, and then press the {#} key.

The machine is ready to copy.

Reference

For Users Code, see ⇒“Key Op- erator Tools” in the General Set- tings Guide.

B Make sure "Ready" is displayed on the screen.

If any other function is displayed, press the {Copy} key.

❖Initial copy display

C Make sure there are no previous settings remaining.

Note

❒When there are previous set- tings remaining, press the {Re- set} key and enter again.

D Place originals.

Reference

⇒p.12 “Placing Originals”

E Set desired settings.

Reference

Please refer to each functions.

F Enter the number of copies re- quired with the number keys.

Note

❒The maximum copy quantity that can be set is 999.

G Press the {Start} key.

The machine starts copying.

Note

❒When you place originals on the exposure glass, press the {#} key after all originals are scanned.

❒Copies are delivered face down.

-How to Operate

❖To stop the machine during a multi-

copy run.

⇒Press the {Clear/Stop} key.

❖To return the machine to the initial

condition after copying.

⇒Press the {Clear Modes} key.

❖When clearing entered values.

⇒Press the {Clear/Stop} key or the [Clear] key on the display.

❖To confirm settings.

⇒Press the {Check Modes} key.

17