Lanier LD075 Slip Sheets, D Press the Insert Sheet key, H Press the Next Chapter key, Start key

Copying

C Press the key to select the chapter number.

D Press the [Insert Sheet] key.

E Select the paper tray for slip sheets.

2F Select [Before] to insert slip sheets before the page you specify. Se- lect [After] to insert slip sheets af- ter the page you specify. Enter the page number with the number keys.

G Press the [Insert Quantity] key, and enter the number of sheets you wish to insert with the number keys.

H Press the [Next Chapter] key.

I To specify another location where to insert sheets, repeat steps D to H.

J When you have finished specify- ing all settings, press the [OK] key.

K Press the [OK] key.

L Select the paper tray that contains paper for copying originals.

M Place originals, and then press the

{Start} key.

Slip Sheets

Every time an original page changes, a slip sheet is inserted. This function can be used to insert a slip sheet auto- matically between each OHP trans- parency copied or used as a stack function. You can also copy onto the inserted slip sheets.

	1
1	2
2
3	3

Preparation

Before selecting this function, specify the paper tray for slip sheets. ⇒ "Slip Sheet Tray" in the General Settings Guide

If “1 Sided → 2 Sided”is selected, change it to “1 Sided → 1 Sided”.

Note

❒Load slip sheets of the same size and in the same orientation as the copy paper or OHP transparency.

❖When using OHP transparencies set on the bypass tray

• Copy
12	2
	112

76