Lanier LD060, LD075 manual Center/Border, Outside, Border Erase, Reference

Copy Functions

❖Center

This mode erases center margin of the original image.

❖Center/Border

This mode erases both center and edge margins of the original im- age.

❖ Inside

This mode blanks out a designated area of the copy image.

❖Outside

This mode blanks out all areas of the copy image except the area you choose.

Reference

The erase width in the Border, Center and Center/Border modes is set to 10 mm (0.4”) at default settings. You can change this settings with the User Tools. ⇒ p.101 “Erase Center Width”, ⇒ p.101 “Erase Border 2 Width”

Note

❒The relation between the original's orientation and the erased part is as follows:

L original	K original
1	2
	1

1.Erased part

2.2 – 99 mm, 0.1" – 3.9"

Border Erase

A Press the [Edit/Stamp] key.

B Press the [Erase] key.

C Press the [Erase Center/Border] key. D Set an erase border width.

57