Lanier LD075 manual Auto Reduce/Enlarge, To enter a ratio with the number keys, D Press the OK key

Copying

2

32

Note

❒To change the ratio in 1% steps, just press the {n} or {o} keys. To change the ra-

tio in 10% steps, press and hold down the {n} or {o} keys.

❒If you have incorrectly en-

tered the ratio, readjust the ratio with the [n] or [o] keys.

To enter a ratio with the number keys

APress the [Mag. Ratio] key.

BEnter the desired ratio with the number keys.

CPress the [#] key.

DPress the [OK] key.

C Place your originals, and then press the {Start} key.

Auto Reduce/Enlarge

The machine can choose an appropri- ate reproduction ratio based on the paper and original sizes you select.

Note

❒You cannot use the bypass tray with this function.

❒When using Auto Reduce/En- large, see the following table for the original sizes and directions you can use.

❖ Metric version

Where Original Is	Original Size and
Placed	Direction
Exposure glass	A3L, B4L,
	A4KL, B5KL,
	81/2" ⋅ 13"L
Document feeder	A3L, B4L,
	A4KL, B5KL,
	A5KL, B6KL,
	81/2" ⋅ 13"L

❖ Inch version

Where Original Is	Original Size and
Placed	Direction
Exposure glass	11" ⋅ 17"L, 81/2" ⋅
	14"L, 81/2" ⋅
	11"KL
Document feeder	A3L, A4KL, 11"
	⋅ 17"L, 81/2" ⋅ 14"
	L, 81/2" ⋅ 11"K
	L, 10" ⋅ 14"L,
	51/2" ⋅ 81/2"KL,
	71/4" ⋅ 101/2"L

Reference

⇒p.9 “Sizes difficult to detect”

A Press the [Auto Reduce/Enlarge] key.

B Select the paper tray.

C Set the original, then press the {Start} key.