Inside Erase

Copying

Inside Erase

A Decide where the machine starts scanning (X1, Y1) and where it stops scanning (X2, Y2).

2

Note

You can input lengths of 0 – 432

 

mm, 0 – 17".

B Press the [Edit/Stamp] key.

C Press the [Erase] key.

D Press the [Erase Inside 1] or [Erase Inside 2] key.

E Enter the value of [X1] with the number keys, and then press the [#] key.

F Enter the value of [Y1] with the number keys, and then press the [#] key.

G Enter the value of [X2] with the number keys, and then press the [#] key.

H Enter the value of [Y2] with the number keys, and then press the [#] key.

I Press the [2-sided Setting] key and the [Back Side] key.

B Press the [Edit/Stamp] key.D Press the [Erase Inside 1] or [Erase Inside 2] key. Note

If you don't need to erase the image on the back, go to step K.

J Enter the values of [X1], [Y1], [X2] and [Y2] for the back.

I Press the [2-sided Setting] key and the [Back Side] key.J Enter the values of [X1], [Y1], [X2] and [Y2] for the back. Note

Erasing the image on the back is valid when you copy 2-sided originals.

K Press the [OK] key.

L Press the [OK] key.

M Press the [OK] key.

N Place your originals, and then press the {Start} key.

Outside Erase

A Decide where the machine starts scanning (X1, Y1) and where it stops scanning (X2, Y2).

K Press the [OK] key.N Place your originals, and then press the {Start} key. Note

You can input lengths of 0 – 432 mm, 0 – 17".

B Press the [Edit/Stamp] key.

C Press the [Erase] key.

D Press the [Erase Outside] key.

60

Page 68
Image 68
Lanier LD075 Inside Erase, Outside Erase, B Press the Edit/Stamp key C Press the Erase key, D Press the Erase Outside key