Replacing the light bulb
WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO REPLACE THE LIGHT BULB.
oRemove all adjustable shelves for your safety before changing the light bulb.
oHold and gently lift up the light bulb cover to allow access to the bulb.
oRemove the old bulb by unscrewing it in an
oReplace with a new bulb of the same type (15W) by screwing it in a clockwise direction. Take care to ensure that the bulb is fully secured in the bulb holder.
oRefit the light bulb cover and reconnect your appliance to the mains supply and turn on.
The defrost drain hole
oDefrosting occurs automatically in the refrigerator section during operation. The defrost water is collected by the evaporating tray and evaporates automatically.
oThe drain hole should be cleaned periodically with a drain hole cleaner. This will prevent water from collecting in the bottom of the refrigerator, instead of flowing down the defrost drainage channel and drain hole.
oIMPORTANT: Please note that the drain hole cleaner should not be left in position permanently. Otherwise this may prevent the defrost water from entering the drain hole.
oYou can also pour a small amount of water down the drain hole to clean the defrost drainage channel.
oYou should be careful to make sure that food packages do not touch the rear wall of the appliance, as this can interrupt the automatic defrosting process and deflect water into the base of the refrigerator section.
oUse a solution of bicarbonate of soda and lukewarm water to clean the evaporating tray.
19
