Bay Technical Associates Fiber Media Adapter manual LEDs

LEDs

The BayStack 10BASE-FL RDN Media Adapter provides LEDs to indicate remote signaling and redundant link status. These LEDs are used in combination with the BayStack 10BASE-T Hub “Media Adapter” LED to indicate the status of the active and standby link.

Table 1 describes the redundant 10BASE-FL media adapter LEDs.

Table 1. 10BASE-FL RDN Media Adapter LEDs

Label	Color	Meaning
Rem	Green	Fiber port is connected to a remote port that uses
		remote signaling, and that port is not sending a
		remote fault signal; both Tx and Rx connections
		are good.
	Amber	Fiber port is connected to a remote port that uses
		remote signaling, but the Tx link to the remote Rx
		connector detects a remote fault.
	Off	Fiber port is not connected to another port that is
		capable of remote signaling.
Rdn	Green	Port is in redundant mode and detects no fault.
	Amber	Port is in redundant mode, but this redundant port
		connection has failed.
	Off	Port is not in redundant mode.

893-863-A 3