REMOTE BASS CONTROL MODULE (OPTIONAL)
Before connecting the remote, it will be necessary to find a mounting location that will be easy to access for adjustment. Once you select your mounting location, you will need to run the control wire from the remote to the amplifier. To avoid possibility of induced noise from the car's electrical system (i.e. popping noises or engine noise), run the cable from the remote to the amplifier away from the car's electrical wiring.
Please note: Once the remote is plugged in, it overrides the bass boost on the amplifier and becomes the primary bass adjustment.
HI INPUT |
| INPUT |
|
| BASS POWER |
| R | LEVEL | FILTER | BOOST | |
REMOTE |
| LOW |
| HI |
|
|
|
|
| ||
|
| MIN MAX | FLAT | 60Hz 400Hz | 0dB 12dB |
L
MIN 
MAX
13
