BBE DI-400 FRONT PANEL, 1/4” INPUT CONNECTOR, IN/OUT PUSH BUTTON, LOW CONTOUR CONTROL, PROCESS CONTROL, 1/4” THRU CONNECTOR, PAD PUSH, PHASE PUSH, BUTTON, LED STATUS

FRONT PANEL

1/4” INPUT CONNECTOR

The 1/4” input connector of the DI-400 is unbalanced. The 1/4” input is designed for running instrument cables directly into the DI-400.

IN/OUT PUSH BUTTON

Engages the Sonic Maximizer Process. When the switch is pushed in, the BBE Process is on. When the switch is up, the BBE Process is off.

LOW CONTOUR CONTROL

Regulates the amount of phase corrected bass frequencies.

PROCESS CONTROL

Regulates the amount of phase correction.

1/4” THRU CONNECTOR

This 1/4“ connector is wired in parallel to the Input connector and is used for continuing the connection to

the instrument amplifier.

PAD PUSH	PHASE PUSH
BUTTON
	BUTTON
Push in to
	Push in to
activate
	reverse phase.
“-15dB” pad.

LED STATUS

“RED” = power on, BBE off/out, “GREEN”

=power on, BBE on/in. LED not illuminated = power off.

POWER SWITCH

The Sonic Maximizer LEDs will illuminate when the power is on.

5