REAR PANEL

FUSE

Replace as needed with specified size and type.

XLR OUTPUT CONNECTOR

The XLR output of the DI-400 is balanced. The XLR output is used for running from the DI-400 directly to the input of a mixing console.

1/4” UN-BALANCED INPUT CONNECTOR

The 1/4” input connector is wired in parallel with the front panel input and thru jacks.

XLR Pin configuration:

Pin 1 = Ground, Pin 2 = Positive and Pin 3 = Negative.

GROUND LIFT PUSH BUTTON

When in the “lift” position (in) Pin 1 of the balanced XLR output (ground) is disconnected.

6