Instruction Manual – Model AFG Oil Burner

Service & maintain burner

Owner’s information

Owner service and maintenance

This burner must be installed, adjusted and started only by a quali- fied service agency — an individual or agency, licensed and experienced with all codes and ordinances, who is responsible for the installation and adjust- ment of the equipment.

Have your equipment inspected and adjusted at least annually by your qualified service agency to assure continued proper operation.

Installation and adjustment of the burner requires technical knowledge and the use of combustion test instruments. Do not tamper with the unit or controls. Call your qualified service agency.

Incorrect operation of the burner could result in severe per- sonal injury, death or substantial property damage.

The following could result in fire hazard, severe personal injury, death or sub- stantial property damage. Read carefully.

Never attempt to use gasoline in your heating appliance.

Never store gasoline or combustible materials near the burner or appliance.

Never attempt to burn garbage or refuse in your appliance.

Never attempt to light the burner/appliance by throwing burning ma- terial into the appliance.

Never attempt to use crankcase or waste oil or material other than the approved fuel oils in this burner.

Never restrict the air inlet openings to the burner or the combustion air ventilation openings in the room.

Properly installed and maintained, your AFG burner will provide years of effi- cient, trouble-free operation. Please take care of your equipment by following the warnings provided and by doing the following (notify your qualified service agency if you find anything wrong):

Annually (minimum)

Have your burner/heating appliance serviced at least annually by your quali- fied service agency as noted above.

Daily

Check the room in which your burner/appliance is installed. Make sure:

air ventilation openings are clean and unobstructed

nothing is blocking the burner inlet air openings

no combustible materials are stored near the heating appliance

there are no signs of oil or water leakage around the burner or appliance.

Weekly

Check your oil tank level. Always keep your oil tank full, especially during the summer, in order to prevent condensation of moisture on the inside surface of the tank.

Warranty

Beckett warrants its equipment specifically to those who have purchased it for resale, including your qualified service agency (dealer). In the event of any prob- lems with your equipment or its installation, you should contact your dealer for assistance.

The OilHeat Manufacturers' Association supports the use of low sulfur fuels as defined by ASTM D396, Grades Number 1 Low Sulfur and Number 2 Low Sulfur, as the preferred heating fuel for the following reasons:

Low sulfur fuels reduce deposits on heat exchanger surfaces, extending the service interval between cleanings.

The reduced deposits increase the efficiency of the appliance.

Low sulfur fuels reduce particulate emissions.

Low sulfur fuels reduce oxides of nitrogen emissions.

U.S.A.: P. O. Box 1289 Elyria, Ohio 44036

Canada: R. W. Beckett Canada, Ltd. Unit #3, 430 Laird Road Guelph, Ontario, N1G 3X7

Form Number 6104BAFG R1001

Printed in U.S.A.

© 2001 R. W. Beckett Corporation

12

Page 12
Image 12
Beckett 120 Vac/60 Hz Owner’s information Owner service and maintenance, Warranty, Annually minimum, Daily, Weekly

120 Vac/60 Hz specifications

The Beckett 120 Vac/60 Hz is a versatile and reliable solution designed for a variety of heating applications. This model exemplifies a combination of efficiency, user-friendliness, and advanced technology, making it a popular choice for both residential and commercial heating needs.

One of the standout features of the Beckett 120 Vac/60 Hz unit is its exceptional energy efficiency. Designed to minimize energy consumption while maximizing heat output, it incorporates modern technology that helps reduce operating costs. The unit is built with a continuously adjustable firing rate, allowing it to operate at the optimal heating level for varying demand. This not only improves efficiency but also ensures consistent temperature control throughout the space.

Another significant characteristic of the Beckett model is its robust construction. Made from high-quality materials, the unit is designed to withstand the rigors of daily use while maintaining reliable performance. The design also includes features that reduce wear and tear, increasing its longevity and reliability.

Safety is paramount with the Beckett 120 Vac/60 Hz. It comes equipped with multiple safety features, including automatic shut-off mechanisms and overheating protection. This ensures both user safety and peace of mind, making it ideal for families and businesses alike.

The advanced technology used in this model includes a sophisticated control system that allows for precise monitoring and adjustments. Users benefit from intuitive interfaces that provide real-time information about system performance, enabling easy troubleshooting and maintenance.

The Beckett unit also boasts quiet operation, making it suitable for environments where noise reduction is essential. Its compact design allows for flexibility in installation, whether it be in a tight utility room or a more spacious area.

Furthermore, the Beckett 120 Vac/60 Hz supports a range of fuel types, enhancing its versatility. Whether you are using oil, gas, or other alternatives, this unit is equipped to operate efficiently with minimal adjustments.

In summary, the Beckett 120 Vac/60 Hz combines exceptional efficiency, safety features, and advanced technology into a compact and robust heating solution. Its versatility and user-friendly design make it an excellent choice for a variety of applications, offering peace of mind and comfort to both homeowners and businesses.