Do Not Use This Control in an Application that is

Not Within the Ratings Listed in This Section. Improper Control Operation May Result.

Electrical Ratings

Inputs:

◦Voltage: 120 Vac nominal (102 to 132 Vac)

◦Current: 100 mA nominal (150 mA max at 132 Vac)

◦Frequency: 60 Hz

Outputs:

◦Motor: 120 Vac, 10 full load amps (FLA), 60 locked rotor amps (LRA)

*Note: Reduce motor FLA rating by igniter current

◦Igniter: 120 Vac, 3 A @ 0.7 PF min

◦Solenoid Valve: 120 Vac, 1 A @ 0.7 PF min

◦Thermostat Anticipator Current: 0.1 A (if applicable)

◦Thermostat Voltage: 24 Vac (if applicable)

Environmental Ratings:

◦Storage and Operating Ambient Temperature: -40°F to +150°F (-40°C to +65°C)

◦Moisture: 5 to 95% RH, non-condensing and non-crystallizing

Approvals:

◦Underwriters Laboratory Recognition per UL372 and UL1998, and CSA C22.2 No. 199

Do Not Use This

Control Above 19.9

GPH

Most codes and standards require additional safeguards and features for oil burner inputs above 19.9 gph. Consult the appliance manufacturer’s instructions for control selection.

Installation/Operation/ Maintenance

Professional

Service Required

Incorrect installation or misuse of this control could result in severe personal injury, death, or substantial property damage from heavy smoke, explosion or fire.

Please read and understand the manual supplied with this control. This control must be installed, adjusted and put into operation only by a qualified individual or service agency that is:

•Licensed or certified to install and provide technical service to oil heating systems.

•Experienced with all applicable codes, standards and ordinances.

•Responsible for the correct installation and commission of this equipment.

•Skilled in the adjustment of oil burners using combustion test instruments.

The installation must strictly comply with all applicable codes, authorities having jurisdiction and the latest revision of the National Fire Protection Association Standard for the Installation of Oil-Burning Equipment, NFPA 31 (or CSA-B139 and CSA-B140 in Canada).

Regulation by these authorities take precedence over the general instructions provided in this installation manual.

Frozen Plumbing

and Water Damage

Hazard

If the residence is unattended in severely cold weather, burner primary control safety lockout, heating system component failures, power outages or other electrical system failures could result in frozen plumbing and water damage in a matter of hours. For protection, take preventive actions such as having a security system installed that operates during power outages, senses low temperature and initiates an effective action. Consult with your heating contractor or a home security agency.

4

Page 3 Page 5
Page 4
Image 4
Beckett Model 7505 manual Electrical Ratings, Environmental Ratings, Approvals
Page 3 Page 5

Model 7505 specifications

The Beckett Model 7505 is a highly regarded oil burner that delivers reliable performance, efficiency, and a variety of features that make it a popular choice for both home and commercial heating applications. This burner is designed for use with a range of heating systems, including forced air and hot water boilers, making it a versatile option for many users.

One of the standout features of the Model 7505 is its compact design. Measuring just 18 inches in height, 15 inches in width, and 22 inches in depth, this burner easily fits into tight spaces, allowing for flexible installation options. The burner is equipped with a powerful 0.75 GPH nozzle, which is capable of delivering up to 140,000 BTUs per hour, making it suitable for a variety of heating needs.

The Model 7505 incorporates advanced combustion technology, designed to optimize fuel efficiency and minimize emissions. The burner features a high-efficiency combustion head that helps to ensure a complete burn of the oil, leading to lower fuel consumption and reduced greenhouse gas emissions. This commitment to efficiency not only helps the environment but also translates to savings on fuel costs for users.

Moreover, the Beckett Model 7505 comes with a unique primary control unit that enhances the burner's safety and performance. This control unit features an integral reset button, an adjustable primary air setting, and an LED indicator light that provides at-a-glance status updates on operations. These smart features simplify troubleshooting and ensure safe operation of the heating system.

In addition to its impressive performance capabilities, the Model 7505 is designed for durability. Constructed with high-quality materials, including a robust steel casing and a corrosion-resistant finish, this oil burner can withstand the rigors of regular use in various environments.

Maintenance is also made easy, thanks to the removable panels and access points that allow for quick and efficient servicing. Beckett's reputation for reliability and longevity makes the Model 7505 a wise investment for those seeking a dependable heating solution.

Overall, the Beckett Model 7505 stands out with its combination of efficiency, safety, and ease of use. Whether for heating residential properties or commercial spaces, the Model 7505 continues to be a go-to choice for many satisfied customers.
Top Page Image Contents