USB-Mode U-4 expanded | Behringer BCF2000-WH instruction

B-CONTROL	FADER BCF2000-WH
USB-Mode U-4 (expanded):

Fig. 4.4: Routing and use in USB mode 4

This operating mode should be selected if you want to couple two B-CONTROLs to control your software using both B-CONTROLS through a common USB port. Additionally, MIDI OUT B of the first controller (unit 1) can be used from the computer as a 16-channel MIDI output. The data of both B-CONTROLs is mixed and is sent to the host computer via USB. Select stand- alone mode 3 for the second unit (unit 2).

4. OPERATION

11

Image 11

Behringer BCF2000-WH manual USB-Mode U-4 expanded

Contents

Version 1 Control Fader Control Fader BCF2000-WH Important Safety Precautions Control Fader Foreword Table of Contents System requirements IntroductionIntroduction to Midi Before you get started Example Midi standardMidi connections Midi format Midi Thru Control Elements and ConnectionsNrpn SysEx Dump Serial Number USB modes USB mode U-1Operation Operating modes Midi Thru and forwards Midi in data unchanged. OUT B is not OUT B connector. This way, you can use a master keyboard toYour B-CONTROL sends Midi data to the computer and receives Applications USB-Mode U-4 expanded Stand Alone-Mode S-2 Stand-alone modes Effects unit. If additional Midi devices need to be talked Stand Alone-Mode S-3 Stand Alone Mode S-4Control to Midi in of the second B-CONTROL. OUT a Second B-CONTROL needs to be connected to the Midi input Programming Play mode menu Programming in Edit mode Table explanation Assignment of the push encoders in Edit mode Switch types Midi messages GS/XG Parameter Main Controls Settings in the global setup menuPush encoder allocation in global setup menu Additional functions Global Edit SetupEmulation Modes Standard Midi Controller Appendix Midi note number assignment Specifications Warranty Federal Communications Commission Compliance Information Control Fader BCF2000-WH Control Fader BCF2000-WH