RACKTUNER BTR2000

2.2 Rear

Fig. 2.3: Serial number and sockets on the rear of the BTR2000

SERIAL NUMBER

MUTE

You can connect a single footswitch (such as the BEHRINGER DUAL A/B SWITCH AB200) to the 1/4" TS MUTE connector (chapter 6)

SELECT

You can connect a double footswitch (such as the BEHRINGER FS112) to the 1/4" stereo SELECT connector (chapter 6)

SOUND

The SOUND connector can output the sounds generated by the unit (reference tone, metronome click).

MAIN

Depending on the cable connections on the BTR2000 the MAIN connector can either output the sounds generated by the unit and the instrument signal or the instrument signal alone (chapter 3).

INPUT 1 and INPUT 2

You can connect one or two instruments to the unit via the INPUT 1 and INPUT 2 connectors. The built-in microphone is available only when INPUT 2 is selected (chapter 3).

3. INPUT CHANNEL SELECTION

Signal distribution to the outputs

The BTR2000 has 2 inputs and 2 outputs. Depending on the input selection and on what is connected to the outputs, the sounds generated by the unit (metronome click and reference tones) can be output from the SOUND connector or from the MAIN output connector together with the instrument signal.

You can decide whether to use two different amplifiers for the instrument sound and the BTR2000 sounds or just one.

Possible connection configurations:

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Listen to instrument and BTR2000 tones

Listen to instrument and BTR2000 tones

utilizing ￿￿￿￿￿￿￿￿￿￿￿￿￿￿

utilizing ￿￿￿￿￿￿￿￿￿￿￿￿

 

 

￿￿￿Select￿￿￿￿￿￿￿￿￿￿

Select ￿￿￿￿￿￿￿

￿￿￿Select ￿￿￿￿￿￿￿(to use the integrated

(to use the integrated microphone, push MUTE

microphone, push MUTE as well)

as well)

￿￿ Connect instrument amp to ￿￿￿￿;

￿￿￿Connect your amp to ￿￿￿￿;

￿ Connect your amp to ￿￿￿￿￿ to hear

￿￿￿￿￿￿￿￿￿￿￿whatsoever may be connected

metronome click signal or reference tones

to ￿￿￿￿￿￿￿

Table 3.1: Setups for working with one or two amplifiers

3. INPUT CHANNEL SELECTION

7