Behringer BX4410A manual Specifications, Loudspeaker connections

ULTRABASS BX4410/BX4410A

+Please ensure that only qualified personnel install and operate the BX4410/BX4410A. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the unit.

6.2.1 Loudspeaker connections

In total, your BX4410/BX4410A features three loudspeaker connectors.

+When connecting loudspeakers to the 1/4" jack connectors, please switch off the device first. Power up the unit again after all connections have been made.

Please use a speaker compatible to Neutrik® Speakon® if you want to connect one speaker cabinet only. For optimum output power delivered to the speaker(s), use your BX4410/BX4410A in combination with one 4 W or two 8 W cabinets.

Your BX4410/BX4410A is equipped with high-quality connectors compatible to Neutrik® Speakon®, which ensure safe and trouble-free operation. These connectors were especially developed for high-power loudspeakers. Once it is plugged in, it safely locks into its position and cannot be accidentaly disengaged. It prevents the occurrence of electrical shock and ensures the correct polarity.

Fig. 6.4: Professional connector compatible to

Neutrik® Speakon®

7. SPECIFICATIONS

AUDIO INPUTS
Active instrument input	1/4" TS connector, unbalanced
Input impedance	approx. 220 kW unbalanced
Passive instrument input	1/4" TS connector, unbalanced
Input impedance	approx. 730 kW unbalanced
Return	1/4" TS connector, unbalanced
Input impedance	approx. 15 kW unbalanced
AUDIO OUTPUTS
Send/Tuner	1/4" TS connector, unbalanced
Output impedance	min. 2 kW unbalanced
Line Out	1/4" TS connector, unbalanced
Output impedance	approx. 100 W unbalanced
Output level	max. +20 dBu
D.I. output	XLR connector, servo-balanced
Output impedance	approx. 100 W balanced
Output level	max. 0 dBu
Loudspeaker connectors	1/4" TS connector, unbalanced
	professional connector
	(compatible to Neutrik® Speakon®)
Load impedance	min. 4 W
SYSTEM SPECIFICATIONS	450 Watts into 4 W
Power amp output
SPEAKERS
High-power bass speakers	4 x 10" BUGERATM Hard Attack
	Aluminum cone speakers
	(BX4410A)
	4 x 10" BUGERATM Classic Tone
	bass speakers (BX4410)
Sensitivity	94 dB @ 1 W / 1 m
SPL	max. 119 dB
Impedance	8 W
Frequency response	46 Hz - 16 kHz
Power (program)	300 W
Tweeter	1" tweeter driver
Frequency response	5 kHz - 16 kHz
POWER SUPPLY
Mains voltages	U.S./Canada
	120 V~, 60 Hz, 6 A
	China/Korea
	220 V~, 50 Hz, 3 A
	Europe/U.K./Australia
	230 V~, 50 Hz, 3 A
	Japan
	100 V~, 50 - 60 Hz, 6 A
	General export model
	120/230 V~, 50 - 60 Hz
Fuse	100 - 120 V~: T 10 A H 250 V
	220 - 240 V~: T 6.3 A H 250 V
Mains connection	Standard IEC receptacle
PHYSICAL/WEIGHT
Dimensions (H x W x D)	approx. 33" (840 mm)
	x 26 3/4" (680 mm)
	x 16 1/3" (415 mm)
Weight	approx. 60.5 kg (133.4 lbs)

BEHRINGER constantly strives to maintain the highest quality standards. Modifi- cations may be made, if necessary, without prior notice. The specifications and appearance of the equipment may therefore differ from those listed or illustrated.

7. SPECIFICATIONS 9