Behringer manual ULTRA-CURVEPRO DEQ2496, Analog inputs

Page 6 of 7

ULTRA-CURVE PRO

DEQ2496

Analog inputs

Type	electronically balanced
Connector	XLR
Impedance	22 kΩ
Max. input level	+12 or +22 dBu, switchable
CMRR	40 dB typ.
Analog outputs (main)
Type	servo-balanced
Connector	XLR
Impedance	100 Ω at 1 kHz
Max. output level	+12 or +22 dBu, switchable
Analog outputs (aux)
Type	servo-balanced
Conector	¼" stereo jack
Impedance	100 Ω at 1 kHz
Max output level	+12 dBu
SYSTEM SPECIFICATIONS
Frequency range	10 Hz to 35 kHz (-1 dB)
	@ 96 kHz sampling rate
Signal-to-noise ratio	> 113 dB main input/output
	> 107 dB aux output
THD	0.007 % TYP. @ +4 dBu, 1kHz, unity gain
Crosstalk	< -92 dB/-95 dB
Bypass
Type	Relay, hard-bypass in case of power failure
Measurement microphone input
Type	electronically balanced
Input impedance	2kΩ
Max. input level	variable from -14 dBu to +22 dBu
(LINE)
Max. input level	variable from -42 dBV/Pa to -6 dBV/Pa
(MIC)
Phantom power	+15 V, switchable

Digital input 1

Type	XLR transformer-balanced
Standard	AES/EBU or S/PDIF
Input impedance	110 Ω
Nom. Input level	0.2 – 5 V peak-to-peak
Digital input 2
Type	TOSLINK optical
Standard	AES/EBU or S/PDIF
Digital output 1
Type	XLR transformer-balanced
Standard	AES/EBU or S/PDIF
Impedance	110 Ω
Output	3.5 V peak-to-peak
Digital output 2
Type	TOSLINK optical
Standard	AES/EBU or S/PDIF
Sync input
Type	BNC
Standard	Wordclock (1 x sample rate)
Input impedance	50 k Ω
Nom. Level	2–6 V peak-to-peak
MIDI interface
Type	5-pole Din jacks In/Out/Thru
Implementation	cf. MIDI implementation chart
Digital processing
Converter	24-bit Delta-Sigma,
	64/128-oversampling (AKM®)
Sample rate	44.1, 48, 88.2, 96 kHz
Graphic equalizer (GEQ)
Type	digital 1/3-oct. EQ
Frequency Range	20 Hz to 20 kHz, 31 1/3-oct. bands
	according to ISO frequencies
Bandwidth	1/3-oct.
Control range	+15 to -15 dB

Parametric equalizer (PEQ)

Type	max. 10 independent,
	fully parametric fi lters per channel
Frequency range	20 Hz to 20 kHz
Bandwidth	1/10 to 10 oct., shelving fi lters
	(6 and 12 dB)
Control range	+15 to -15 dB
Dynamic equalizer (DEQ)
Type	max. 3 independent,
	fully parametric fi lters per channel
Frequency range	20 Hz to 20 kHz
Bandwidth	1/10 to 10 oct., shelving fi lters
	(6 and 12 dB)
Control range	+15 to -15 dB
Threshold	variable from 0 to -60 dB
Attack	0 to 200 msec
Release	20 to 4,000 msec
Ratio	1:2 to 1:100
Feedback Destroyer (FBD)
Type	digital signal analysis for
	feedback identifi cation
Filter	max. 10 digital notch fi lters per channel,
	programmable or as automatic feedback
	suppression system
Frequency range	20 Hz to 20 kHz
Bandwidth	1/10 to 1/60 oct.
Control range	0 to -60 dB
Digital delay
Type	digital stereo delay
Max. delay time	300 ms, independently adjustable for
	each channel
Min. resolution	0.02 ms
Delay units	seconds, meters or feet
Level meters
Type	digital level meter with simultaneous
	graphic display of Peak and RMS values
	and virtual analog VU meter