ENGLISH

10

Pro Mixer DX2000USB User Manual

 

Pro Mixer DX2000USB User Manual

11

ENGLISH

 

 

 

[59]Phono/Line inputs. RCA sockets.

[60]Light out. Unbalanced ¼" jack socket, wired tip = signal and sleeve = gound/screen.

[63]Sub bass out. Balanced XLR, wired pin 1 = ground/screen, pin 2 = hot (+ve) and pin 3 = cold (-ve).

[64]Main inserts. For inserting into the main mix signal. Unbalanced, send and return of one channel on a single ¼" jack socket, wired tip = send (out), ring = return (in) and sleeve = ground/srceen.

[65]Main outputs. Balanced ¼" jack sockets, wired tip = hot (+ve), ring = cold (-ve) and sleeve = ground/screen.

[66]Record out (with voice). RCA sockets.

[67]Main outputs. Balanced XLR, wired pin 1 = ground/ screen, pin 2 = hot (+ve) and pin 3 = cold (-ve).

[68]Monitor outputs. Unbalanced ¼" jack, wired tip = signal and sleeve = ground/screen.

[69]Zone outputs. Unbalanced ¼" jack, wired tip = signal and sleeve = ground/screen.

[70]Monitor outputs. Balanced XLR, wired pin 1 = ground/ screen, pin 2 = hot (+ve) and pin 3 = cold (-ve).

[72]IEC socket. For connecting the mixer a standard IEC cable. Always connect the mixer to a wall outlet before engaging the POWER switch.

[74]USB input. Accepts a standard Type B USB cable for stereo input/output connection with a computer.

And on the front panel:

[21]Line in. RCA sockets.

[22]Line out (without voice). RCA sockets.

[43]Phones. ¼" jack socket, wired tip = left signal, ring = right signal and sleeve = ground/screen.

◊Please ensure that only qualified persons install and operate the PRO MIXER DX2000USB. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the PRO MIXER DX2000USB!