EUROLIVE E1220A/E1520A

Fig. 2.2: Control elements and connections

(E1220A and E1520A)

{9} The mains connection is established using a cable with an IEC mains connector. This cable is packaged with the E1220A/E1520A. To avoid ground-loop hum, loudspeakers and mixing consoles should be connected to the same power circuit.

[10]You can replace fuses at the FUSE SWITCH of the E1220A/E1520A. Always replace fuses with the same type. Please follow the instructions given in chapter 5 “SPECIFI- CATIONS.”

[11]Press POWER to turn on your E1220A/E1520A.

++ The POWER switch does not fully disconnect the unit from the mains. To disconnect the unit from the mains, pull out the main cable plug or appliance coupler. When installing the product, ensure the plug or appliance coupler is readily operable. Unplug the power cord completely when the unit is not used for prolonged periods of time.

[12]SERIAL NUMBER

3.Application examples

++ Turn the LEVEL control fully to the left before you switch on the unit with the POWER switch. Then, raise the volume to a suitable level.

3.1Using a mixing console

A common way to use 2 E1220A/E1520A loudspeakers is with a mixing console. In this case, connect each of the main outputs that are on the mixing console to a E1220A/E1520A loudspeaker. The E1220A/E1520A includes XLR and 1/4" connectors. To avoid interference, use only XLR or 1/4" jack cables.

3.2Using several E1220A/E1520A loudspeakers

EUROLIVE E1520A

 

INPUT

 

INPUT

 

 

 

 

 

 

LINK OUTPUT

LINK OUTPUT

 

 

 

 

 

 

 

 

 

 

INPUT

 

INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output L

Output R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EURORACK UB2442FX-PRO

Fig. 3.1: Wiring several E1220A/E1520A loudspeakers using

the LINK OUTPUT connector

For larger rooms, you can connect several E1220A/E1520A speakers using the LINK OUTPUT connector {3} (see fig. 3.1).

3.3 Direct connection of a stereo signal source

When you use two E1220A/E1520A loudspeakers, you can directly connect one stereo signal source, for example, a CD player. In this case, each of the speakers is connected to 1 signal-source output. (If necessary, use the appropriate adaptor.)

6

Application examples