Behringer eg2180 2. Side Panel and Pedal Box Assembly, 3. Modesty Panel Assembly, Modesty Panel Assembly

EUROGRAND EG2180

2. Side Panel and Pedal Box Assembly

1.Position the Pedal Box {4} against the Left Side Panel {2} and then use two screws {7} to fasten the side panel. Finally, attach a plastic cap to each screw.

2.Position the Pedal Box {4} against the Right Side Panel {3} and then use two screws {7} to fasten the side panel. Finally, attach a plastic cap to each screw.

3.You can find the pedal cable in the Pedal Box {4}. Untie and straighten out the cable attached to the bottom of the Pedal Box.

3. Modesty Panel Assembly

1.Position the holes of the Modesty Panel {5} against the holes of the side panel brackets and then use two screws {8} with at- tached washers to fasten the top of the Modesty Panel.

2.Use three screws {8} with attached washers to fasten the bottom of the Modesty Panel.

3.Use the cable clamp to take up any slack in the pedal cable.