21EUROGRAND EG2280USB/EG8280USB User Manual
•Tuning
You can save the following settings for this group of functions:
•Transposition (see chapter 5.2)
•Fine tuning (see chapter 5.6.3)
•Tuning (see chapter 5.6.4)
Function: E8.3
Value: | On, Off |
Description: |
|
Off: | Save function for tuning settings is disabled (default setting) |
On: | Save function for tuning settings is enabled |
•Soft pedal
You can save the following settings for this group of functions:
•Soft pedal function (see chapter 5.5.8)
•Soft pedal intensity (see chapter 5.6.2)
Function: E8.4
Value: | On, Off |
Description: |
|
Off: | Save function for soft pedal settings is disabled |
| (default setting) |
On: | Save function for soft pedal settings is enabled |
5.6.6Restoring the factory default settings Use the following procedure to recall the factory default settings.
◊Tip: All saved parameters as well as the music sequencer data will be lost during either one of the following procedures.
1)Use the POWER switch to switch the instrument off (if not already done).
2)Play and hold down the top C key on the keyboard, then switch the EG2280USB/EG8280USB back on.
+
An alternative procedure is described below:
1)Use the POWER switch to switch the instrument off (if not already done).
2)Press and hold down the TRACK 1 and TRACK 2 buttons, then switch the EG2280USB/EG8280USB back on.
3) Let go of the TRACK buttons after about 5 seconds.
6. Connection to External Equipment
The EG2280USB/EG8280USB provides a variety of connectors for connecting the instrument to external devices.
!!Caution
◊Be sure that all devices are switched off before you make any connection.
◊NEVER connect the LINE IN connectors of the EG2280USB/EG8280USB to its LINE OUT connectors. This will cause a feedback loop producing high volume levels which could damage both the instrument and your hearing!
6.1 Connecting external sound sources
The EG2280USB/EG8280USB is equipped with a stereo LINE IN connector for connecting external sound sources to your digital piano. These signals are reproduced through the internal loudspeakers and connected headphones. If you wish to practice with musical accompaniment, you can use this input to connect a CD player or drum computer. In the same way, you could connect an external synthesizer or sound module and use its sound generator with your instrument. An additional MIDI connection enables you to play an external sound generator from the keyboard of the EG2280USB/EG8280USB (see chapter 6.3.1). The keyboard also has a MIC input for the connection of dynamic or condenser microphones, and an AUX IN jack for sound sources that use 1/8" plugs.
behringer.com