Behringer EP2000, EP4000 Noise, Weight, Cooling, Controls, Distortion, Indicators, Connectors, Voltage Gain, Power Supply, Damping Factor, Load Protection, Input Impedance

12EUROPOWER EP4000/EP2000 User Manual

Distortion

	EP4000	< 0.02%
	EP2000	< 0.01%
Frequency Response
	at 10 dB below rated output power	20 Hz - 20 kHz, +0/-1 dB
	at -3 dB points	5 Hz - 50 kHz
Damping Factor

Cooling

EP4000/EP2000	Continuously variable speed fan,
	back-to-front air flow
Amplifier Protection
EP4000/EP2000	Full short circuit, open circuit, thermal
	and HF protection Stable into reactive
	or mismatched loads
Load Protection

	EP4000/EP2000	> 300 @ 8 Ω
Noise
	unweighted, 20 Hz to 20 kHz	-100 dB
Voltage Gain
	EP4000	50x (34 dB)
	EP2000	40x (32 dB)
Input Sensitivity
	V RMS (@ 8 Ω)	EP2000 1.15 V (+3.4 dBu)
		EP4000 1.23 V (+4.0 dBu)
Input Impedance
	EP4000/EP2000	10 k Ω unbalanced, 20 k Ω balanced
Controls
	Front	Power switch, gain control (channels 1
		and 2)
	Rear	DIP switches (10x)
Indicators
	POWER	green LED
	CLIP	red LED, 1 per channel
	SIGNAL	yellow LED, 1 per channel
Connectors
	Inputs	Balanced XLR and
		¼" TRS connectors
	Outputs	Touch-Proof binding posts and
		professional speaker connectors

	EP4000/EP2000	Turn-on/off muting, AC coupling
Output Circuit Type
	EP4000	Class H complementary
		linear output
	EP2000	Class AB complementary
		linear output
Power Supply
Mains Voltage/Breaker
	100 - 120 V~, 50/60 Hz	15 A
	220 - 230 V~, 50/60 Hz	8 A
Power Consumption
	EP4000	2600 W
	EP2000	1600 W
	Mains connector	Standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D)
	EP4000/EP2000	approx. 3.5 x 19 x 15.8"
		approx. 88 x 483 x 402 mm
Weight
	EP4000	approx. 36.6 lbs / 16.6 kg
	EP2000	approx. 34.6 lbs / 15.7 kg

BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the specifications and design of the device may differ from the information given in this manual.