8EUROPOWER EP4000/EP2000 User Manual

Fig. 3.2: DIP switch positions for 2-channel operation

Parallel mode is identical to 2-channel mode, except for the inputs of both channels are internally connected in parallel. One input signal routes parallel both channels, while their filters etc. are independently controlled.

Examples:

•A mono signal is fed into both channels, whereby amplification of each channel is controlled separately

•Parallel mode (as described above) with connection of an additional amp via the remaining free input connector. The input signal is present there and may be connected to further equipment

•When connecting a balanced input signal, please make sure to exclusively use balanced cables for passing the signal further on. Otherwise, a single unbalanced cable can turn the entire signal unbalanced

Mono out

Input channel 1

XENYX X2222USB Mixing Console

EUROPOWER EP2000 (Parallel Mode)

EUROLIVE B1520 PRO Full range loudspeaker

Fig. 3.4: DIP switch positions for parallel operation

When running in mono-bridged mode, the voltage of both channels is added up and fed into a single loudspeaker system. There is one input and one output signal respectively, and only the controls of channel 1 (and not of channel 2) are used.

◊However, should the DIP switches 4 and 5 still be in PARALLEL INPUTS position while in mono-bridged mode, the signal on the free input (input channel 2) can be forwarded to an additional amp.

Examples:

•Driving a single 8-Ohm loudspeaker

•Driving a single 4-Ohm loudspeaker

Electric guitar

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V-AMP PRO

Input

 

 

 

 

 

 

 

 

channel 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EUROPOWER

EP2000

(Mono Bridged

Mode)

BG412F

Fig. 3.5: Mono-bridged mode

Fig. 3.3: Parallel operation