TUBE ULTRAGAIN MIC100
If your MIC100 is connected to the mains via the enclosed power supply unit, the POWER LED lights up to indicate that your MIC100 is running.
The 20 dB PAD button reduces the input sensitivity by 20 dB. The appropriate setting depends on the equipment connected. No matter what your application is, the clip LED warns you to reduce the gain setting, so as to avoid distortion.
This +48 V switch activates the phantom power supply for the XLR input. Phantom power supply is required for operating condenser microphones.
With the PHASE REVERSE switch, the input signal is reversed by 180°. This function is available for both mic and line signals. Use this function in a
Use the LIMITER switch to limit the signal and to prevent distortion.
The OUTPUT control governs the output level of the device within a range from
2.3 Serial number
The MIC100’s serial number is located on the bottom cover. Please take time to fill in and return the warranty card within 14 days after the date of purchase, so as to benefit from our extended warranty. Or use our online registration option available on the World Wide Web at www.behringer.com.
3. WIRING EXAMPLES
You’ll be surprised how flexibly you can set up your MIC100. The following chapter describes some typical wiring examples.
6 | 3. WIRING EXAMPLES |
