MINIAMP AMP800
1.1.2 Initial operation
Do not put the AMP800 on any equipment that generates intense heat, for example an amplifier. Ensure that the ventilation openings that are located on the top panel of the AMP800 are not covered or blocked.
To power the AMP800, use only the power supply unit that is delivered with your equipment.
1.1.3 Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (www.behringer.com/support).
Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently.
Thank you for your cooperation!
2. CONTROL ELEMENTS
The AMP800 is a headphone amplifier that includes 4 Headphone Channels, so you can share the AMP800 with other musicians. In addition, each musician can choose between 2 audio channels: Input Channel A and Input Channel B.
Ensure that only qualified personnel set up and operate the AMP800.
2.1 Front panel
This section describes how to use the front panel of the AMP800, illustrated as follows:
Fig. 2.1: AMP800 front panel
In the previous illustration, each control element is associated with a callout, for example 
. In this section, use these callouts to identify details about each control element.
For each Input Channel (A and B), the front panel includes control elements 
and 
. To manage the signal in each of these Input Channels, use these control elements:
LEVEL control: To adjust the input level of a signal, turn this control toward 0 (minimum level) or, alternatively 6 (maximum level).
6 | 2. CONTROL ELEMENTS |
