DIGITAL MONITOR SPEAKERS MS20/MS40
3. WIRING
The DIGITAL MONITOR SPEAKERS MS20/MS40 are designed to accommodate a variety of connector types for almost any situation you may encounter.
You will find all audio inputs on the right speaker. The left speaker only has one audio input which is fed from the right speaker.
Be sure to mute the signal sources before you put the monitor speakers into operation.
Fig. 3.1: Computer/keyboard setup
Begin by connecting the left speaker to the right speaker by
wiring the attached speaker cable from connector to
connector on the left speaker.
Connect the analog outputs of your mixer, keyboard or computer
sound card to LINE 1 input . Connect a second piece of
equipment to LINE 2 inputs .
If you own equipment with digital
MD
. Select the digital signal you want to monitor with the input
selector switch .
You can mix two input signals within the MS20/MS40 by using
the volume controls and . This enables you to monitor two different sound sources simultaneously. The above wiring example shows how you can monitor your live keyboard performance to a playback coming from your MD player or digital audio workstation (computer).
The MS20/MS40 speakers are shielded, which allows you to place them near your computer monitor without causing interference or damage. However, do not place your MS20/MS40 speakers near power amps. Doing so will result in an induced hum in your speakers.
4. SPECIFICATIONS | |
Loudspeakers |
|
MS20: | Ø 65 mm (2 1/2"), 8 Ω |
Tweeter | |
Woofer | Ø 92 mm (3 5/8"), 4 Ω |
MS40: | Ø 65 mm (2 1/2"), 8 Ω |
Tweeter | |
Woofer | Ø 120 mm (4 3/4"), 4 Ω |
Audio inputs | 1/8" TRS stereo, impedance 20 kΩ |
Line 1 | |
Line 2 | 2 RCA, impedance 20 kΩ |
Digital inputs |
|
Optical | TOSLINK |
Coaxial | RCA |
Converter | |
Sample rate | < 192 kHz |
System specifications | |
MS20: |
|
Output power | 2 x 10 W |
Frequency response | 65 Hz to 25 kHz |
MS40: |
|
Output power | 2 x 20 W |
Frequency response | 50 Hz to 25 kHz |
Power supply |
|
Mains voltages | USA/Canada 120 V~, 60 Hz |
| Europe/U.K./Australia 230 V~, 50 Hz |
| China 220 V~, 50 Hz |
| Japan 100 V~, 50 - 60 Hz |
| General export model |
Power consumption | 120/230 V~, 50 - 60 Hz |
| |
MS20: | 80 W |
MS40: | 90 W |
Physical
MS20:
Dimensions (H x W x D)
9 2/5" x 6" x 7 3/8"
239 mm x 154 mm x 187 mm
Weightright: 8.14 lbs. (3.7 kg) left: 4.51 lbs. (2.05 kg)
MS40:
Dimensions (H x W x D)
11" x 6 4/5" x 9 5/8"
279 mm x 173 mm x 245 mm
Weightright: 10.78 lbs. (4.9 kg) left: 7.04 lbs. (3.2 kg)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
4. SPECIFICATIONS | 5 |