Behringer MX2442A manual Modifications, Aux send pre-EQ modification on mono channels

EURODESK MX2442A

10. MODIFICATIONS

The following modifications require some knowledge in soldering. Only attempt that if you are experienced in using an iron on PCBs. Otherwise, refer to qualified personnel. After modification the BEHRINGER warranty becomes discretionary.

Links should not be threaded into holes on the PCB. They should be soldered to the tinned areas around the holes, and bowed slightly upwards in between.

Aux sends 1/2 > pre-EQ

All channel aux sends are post-EQ. If you want to convert them, carry out the modification described below to each channel. The right PCB area is indicated by a yellow printing (see figures below).

1)Disconnect power supply.

2)Cut the “post” track.

3)Add in a “pre” link.

4)Repeat for all channels you want to be modified.

Fig. 10.1: Aux send > pre-EQ modification on mono channels

Fig. 10.2: Aux send > pre-EQ modification on stereo channels

10. MODIFCATIONS 21