Chapter 2 | 2 |
Installation |
This Chapter covers the physical installation of the LevelOne Wireless
Broadband Router.
Requirements
•Network cable - standard 10/100BaseT network (UTP) cable with RJ45 connectors.
•TCP/IP protocol must be installed on all PCs.
•For Internet Access, an Internet Access account with an ISP, and either of:
•A DSL or Cable modem (for WAN port usage)
•An analog modem or ISDN TA (for Serial port usage
•To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE802.11b specifications.
•For shared access to the attached printer, the following clients are supported:
•Windows 95/98/ME
•Windows NT 4.0, 2000 or XP
•Apple Macintosh
•Unix (LPD printing)
Procedure - WBR-1100TX
Figure 4: Installation – WBR-1100TX
10