LevelOne WBR-1400TX, WBR-1100TX manual Connection Status Pptp, Data Pptp Status Screen

LevelOne Wireless Broadband Router User Guide

Connection Status - PPTP

If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be displayed when the "Connection Details" button is clicked.

Figure 30: PPTP Status Screen

Data - PPTP Status Screen

Connection

Physical Address	The hardware address of this device, as seen by remote devices on the
	Internet. (This is different to the hardware address seen by devices on
	the local LAN.)
IP Address	The IP Address of this device, as seen by Internet users. This address
	is allocated by your ISP (Internet Service Provider).
PPTP Status	This indicates whether or not the connection is currently established.
	• If the connection does not exist, the "Connect" button can be
	used to establish a connection.
	• If the connection currently exists, the "Disconnect" button can be
	used to break the connection.
Connection Log
Connection Log	• The Connection Log shows status messages relating to the
	existing connection.
	• The "Clear Log" button will restart the Log, while the Refresh
	button will update the messages shown on screen.

52