LevelOne Wireless Broadband Router User Guide

Data - Dial-in Users Screen

Modem

Modem

If using a permanent connection or leased line, select "Perma-

 

nent Connection (leased line)".

 

If your modem or ISDN TA is in the drop-down list, just select

 

it.

 

If your modem is not in the list, select the appropriate "Stan-

 

dard Modem" entry and test to see if this works.

 

If the "Standard Modem" selection does not work, select "User-

 

defined", then click the Modem Properties button to configure

 

the modem correctly.

 

 

Modem Properties

This button is only operational for the "User-defined" modem

Button

type.

 

Click this button to open the Modem Properties screen and

 

allow changing of the modem's properties. See Modem Proper-

 

ties Screen later in this Chapter for details.

 

 

Serial Line Speed

Select the speed which is equal to or below the fastest SERIAL line

 

speed (NOT phone line speed) of your modem. Available speeds

 

range from 4.8K to 460.8K (bps).

 

 

Dial-in Settings

 

Enable Dial-in

If checked, the serial port is available for dial-in access. Other-

 

wise, any attempt to dial-in will be blocked.

 

If Internet Access is also enabled, Dial-in users may find it

 

difficult to connect because the telephone line is in use. Reduc-

 

ing the Disconnect after Idle Time-out setting for Internet

 

Access to 1 minute may help.

 

Only authorized users can use the Dial-in connection.

 

See the Dial-in section of the User Manual for details on setting

 

up the remote PC to use the Dial-in facility.

 

 

Disconnect after

If checked, the Dial-in connection will be terminated after

Idle Time

being idle for the time specified.

 

If not checked, the Dial-in connection will never be terminated.

 

 

72

Page 75
Image 75
LevelOne WBR-1400TX, WBR-1100TX manual Data Dial-in Users Screen, Modem, Dial-in Settings