Additional settings Option, Degaussing the screen | HP P1130 P4819A

NOTE

HP 21” Color Monitor User’s Guide

Additional settings (OPTION)

Additional settings (OPTION)

You can manually degauss the monitor, change the menu position, and lock the controls. To adjust one of the OPTION menu adjustment items:

1Press the button. The MENU appears on the screen.

2Press the / buttons to highlight OPTION and

press the button again. The OPTION menu appears on the screen.

3Press the / buttons to select the desired adjustment item. Adjust the selected item according to the

following instructions.

Degaussing the screen

The monitor is automatically degaussed when the power is turned on.

Changing the menu position

Change the menu position if it is blocking an image on the screen.

To change the menu on-screen position:

Press the / buttons to select OSD POSITION for

horizontal adjustment, or OSD POSITION for vertical

adjustment. Then press the / buttons to shift the on- screen menu.

Locking the controls

To protect adjustment data by locking the controls
Press the	/	buttons to select	CONTROL LOCK
and press the		button. Then press the	/	buttons
to select ON.

Only the POWER switch, MENU button, INPUT switch, and CONTROL LOCK of the OPTION menu will operate. If any other items

are selected, the mark appears on the screen.

To cancel the control lock

Repeat the procedure above and set CONTROL LOCK to OFF.

26 English

Image 27

HP P1130 P4819A manual Additional settings Option, Degaussing the screen, Changing the menu position, Locking the controls

Contents

Hp 21-inch color Monitor P4819a Inch Color Monitor HP 21 Color Monitor User’s Guide Important Safety Instructions Minimizing Energy Consumption Minimizing Eye Strain What Your New Monitor Offers Setting Up Your Monitor Where to Place the MonitorConnecting the Cables How To Install The Drivers WindowsWindows XP Windows 95 or Windows # Adjustment Button Using Your MonitorPower Switch Adjustment Button + Input Switch Brightness and Scroll Up ButtonContrast and Scroll Down Button To display the Menu Using the On-Screen MenuTo select the menu you want to adjust To adjust the menu To reset to English Selecting the On-Screen Menu LanguageTo select a language of your choice Displaying the Current Input Signal Selecting the Input Signal Navigating the menu OSD and changes the menu’s Customizing Your Monitor Adjusting the brightness and contrast Automatically sizing and centering the picture Auto Adjusting the picture SIZE/CENTERAdjusting the size of the picture SIZE/CENTER Adjusting the centering of the picture SIZE/CENTER Select To Adjusting the shape of the picture Geometry SelectTo Adjusting the convergence Convergence Select Adjusting the quality of the picture Screen Example of moire Adjusting the color of the picture Color Selecting the color modePreset mode Expert mode Variable mode Restoring the color from the Easy or sRGB menus SRGB mode Mode green power indicator on for at least 30 minutes. If Changing the menu position Additional settings OptionTo cancel the control lock Degaussing the screen Resetting all of the adjustment data for all input signals Resetting the adjustments Resolution Refresh Rate/Hz Supported Video ModesFactory Optimized Modes On-screen messages TroubleshootingIf thin lines appear on your screen damper wires If no Input Signal appears on the screen If OUT of Scan Range appears on the screen Picture is not centered No picture and LED is offNo picture and LED is on Colors are not pure 370 MHz Technical Specifications Environmental Information Care and Cleaning General Hardware WarrantyWarranty repair or replacement Model Service Provided Proof of Purchase and Warranty Period Limitation of WarrantyLimitation of Liability and Remedies Part II Year 2001 Warranty Declaration of Conformity Regulatory Information Ray Radiation Notice Hinweis für Deutschland Geräuschemission TCO CFCs freons