Marantz UD9004 manual Various Settings, Setting the Audio Mode, Other Setup

Other Setup

Setting items	Setting contents
Initialize	Cancel : Do not initialize.
All settings including audio	OK : Execute initialization.
mode and picture quality are
default settings.
Firmware Update	Check for Update : Check if the latest ou can also
Update the	check approximately how long it will take to complete an update.
unit via the Internet.	Start : Starts
	When updating starts, the power indicator lights red and the GUI screen
	is shut down.
	During update, a rough remaining time is indicated on the display.
	When updating is complete the power indicator lights green and normal
	status is resumed.
Information	GFont LicenseH
Displays the license for	Japanese (Original) : Displays in Japanese.
the IPA font used by this	The font used in this product’s GUI menu screen conforms to IPA
product.	font speciA font license
	agreement.
	http://ipafont.ipa.go.jp/enduser_license.html

Cautions on “Firmware Update”

•In order to use these functions, you must have the correct system requirements and settings for a broadband Internet connection (vpage 21, 31).

•Do not turn off the power until updating is completed.

•Information regarding the “Firmware Update” function will be announced on the MARANTZ web site each time related plans are de

•Even with a broadband connection to the Internet, approximately 1 hour is required for the updating procedure to be completed.

Once updating starts, normal operations on the UD9004 cannot be performed until updating is completed. Also, setting items of the GUI menu of UD9004 or setting items of the image adjustment may be initialized.

ENGLISH

Various Settings

You can set the audio mode and change playback

You can set various modes during playback. The setting menu is displayed at the top of the screen.

1	Press MODE button.		Vertical Stretch	Off
	Displays the currently settable menu.		BD Audio Mode	Mix Audio Output
			File filter	All
b The display content changes depending on the media being played back.
	Select the setting item using d, f buttons, and then press ENTER
2 or 1 button.
	Use d, f buttons to select a setting and use ENTER button to change
3 the setting.
Setting the Audio Mode			Default settings are underlined.
	Setting items		Setting contents
BD Audio Mode		HD Audio Output : Can view by outputting high quality signals such as
Switch BD audio playback		Dolby TrueHD, Dolby Digital Plus, or DTS-HD as its high sound quality
mode.		bitstream. Cannot listen to interactive or secondary audio.
		Mix Audio Output : Outputs a mix of primary audio/interactive audio/
		secondary audio.
		In the case of Dolby TrueHD, Dolby Digital Plus and DTS-HD audio
		playback, set to “HD Audio Output”.
		NOTE
		When “Mix Audio Output” is set and DTS-HD audio signals are played,
		only the DTS digital surround stream of the DTS-HD audio stream is
		decoded and output.
Surround Mode		Direct : Do not apply surround processing and output audio as is.
Converts a 2-channel source,		DOLBY PLgx (or PLg) : Apply DOLBY PLgx (or PLg) surround processing
etc. to output multi-channel		and output the signal.
surround audio.		DTS NEO:6 : Apply DTS NEO:6 surround processing and output the
		signal.

NOTE

•This setting is valid when “Audio Setup” – “7.1ch Audio Out” on the GUI menu is set to “Multi Channel” and when “HDMI Setup” – “Audio Setup” on the GUI menu is set to “Multi LPCM BM On” (vpage 25).

•This setting is invalid when “Audio Setup” – “Source Direct” on the GUI menu is set to “On” (vpage 29).

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci

Remote control operation	SET UP	:Displaying the menu	d f 0 1	:Moves the cursor	ENTER :Decision the setting	RETURN :Return to previous menu	33
buttons		Cancel the menu		(Up/Down/Left/Right)