Marantz UD9004 manual Audio Setup, 1ch Audio Out

Audio Setup

Set the speaker or audio to be output.

Setting related to each channel setting and other audio in the case of outputting analog audio signals decoded by the UD9004.

Setting items Setting contents

	ENGLISH
	Default settings are underlined.
Setting items	Setting contents
7.1ch Audio Out	GSurroundH : Set the presence and size of the Surround speakers.

• Large : Use of a large speaker that can adequately play back low

frequencies.

• Small : Use of a small speaker that has inadequate playback capacity

Getting Started

7.1ch Audio Out

Makes the audio setting for output of analog 7.1-channel audio to a multi-channel ampli.

NOTE

•You cannot select “None” or “No” for “HDMI Setup”

– Audio Setup” – “Multi LPCM BM On” – “Speaker

Con” ( vpage

25)on the GUI menu.

•To output sound from a disc while maintaining the same sound quality as the disc sound, some settings of Audio Setup are disabled as default (vpage 25 ~

To enable the settings of Audio Setup, set Source Direct to “Off” (vpage

Multi Channel

Set the speaker con channel playback.

NOTE

When outputting multi-channel audio set to surround sound by the UD9004, to the analog input of an AV Amp, set so that the AV Amp outputs audio without modiV Amp conducts further

surround processing, the appropriate audio will not be output.

2 Channel

Outputs multi-channel downmixed audio from the front speaker output terminals (FL/FR) of the 7.1-channel audio output terminals. Make this setting when outputting to a TV and 2-channel ampli.

NOTE

The 7.1-channel audio output terminals output only FL/FR when you make this setting.

n Speaker Con Set the speaker con

GFrontH : Set the front speaker size.

•Large : Use of a large speaker that can adequately play back low frequencies.

•Small : Use of a small speaker that has inadequate playback capacity for low frequencies.

GCenterH : Set the presence and size of the center speaker.

•Large : Use of a large speaker that can adequately play back low frequencies.

for low frequencies.

• None : Select when the surround speakers are not connected.

GSurr. BackH : Set the presence, size and number of surround back speakers.

•Size : Set the surround back speaker size.

Large : Use of a large speaker that can adequately play back low frequencies.

Small : Use of a small speaker that has inadequate playback capacity for low frequencies.

None : Select when the surround back speakers are not connected.

•Number : Set the number of surround back speakers.

1 spkr : Use only one surround back speaker. Surround back audio is output from the surround back L terminal.

2 spkrs : Use two surround back speakers.

Connections Setup Playback HDMI Control Function Information Troubleshooting

•Small : Use of a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when a center speaker is not connected.

GSubwooferH : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwooofer is not connected.

Speci

Remote control operation	SET UP	:Displaying the menu	d f 0 1	:Moves the cursor	ENTER :Decision the setting	RETURN :Return to previous menu	27
buttons		Cancel the menu		(Up/Down/Left/Right)