Marantz UD9004 manual Connection to an AV Amp with No Hdmi Audio Input

Match the shapes

Connection to an AV Amp with No HDMI Audio Input

When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, the UD9004 outputs Dolby Digital or DTS bitstream from its digital audio output terminal.

AV Amp

AUDIO

COAXIAL

IN

OPTICAL

IN

NOTE

• Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection.

When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection (vpage 13, “Using an HDMI Cable to Connect to an AV Amp or Television”).

• Super Audio CD’s DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear PCM is output.

•Do not output DTS audio signals to an AV Amp that does not support DTS. Playing back a BD/DVD disc with recorded DTS content can generate noise and even damage your speakers.

•When connecting with an optical transmission cable (sold separately), make sure the plug shape aligns with the socket, and insert fully.

ENGLISH

1. Home Theater Playback – Playing Back Using Multi-channel System –

Audio Signal from the Digital Audio Output (Optical/Coaxial) Terminal

The UD9004 can convert and output digital audio signal format recorded on media. Convert the digital audio signal in accordance with the speci

audio output signals from the UD9004.

		Setting “Audio Setup” – “Digital Out” (vpage 29) on
Media/Files	Audio format	the GUI menu
		Bitstream	PCM/PCM Down Sampling
	Dolby Digital
	Dolby Digital Plus	Dolby Digitalz1
BD	Dolby TrueHD
	DTS	DTSz1
	DTS-HD
	LPCM	2 ch Downmix LPCMz1	2 ch Downmix LPCM
AVCHD	Dolby Digital	Dolby Digital
	LPCM	2 ch Downmix LPCM
	Dolby Digital	Dolby Digital
DVD-Video	DTS	DTS
	LPCM, MPEG	2 ch Downmix LPCM
DVD-Audio	LPCM, PPCM
	Multi area	Audio is not output
Super Audio CD	Stereo area
	CD layer	2 ch LPCM
DivX®	Dolby Digital	Dolby Digital	2 ch Downmix LPCM
	MP3, MP2
CD		2 ch LPCM
MP3, WMA, AAC, LPCM
DTS-CD		DTS	2 ch Downmix LPCM
			(DTSz2)

z1 : Bitstream signals are output in accordance with the BD re-encode setting when “BD Audio Mode” is set to “Mix Audio Output” (vpage 33).

z2 : When “HDMI Setup” – ”Audio Setup” is set to “Auto” on the GUI menu and bit stream is output from HDMI , the DTS bit stream is output from the digital audio output (optical/coaxial) as well.

For content with copyright protection, audio signal is down sampled to 48kHz 16bit and is output.

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci

17