Marantz UD9004 manual Display Setup, Other Setup

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci

ENGLISH

Display Setup		Default settings are underlined.
Set display-related items.
Setting items		Setting contents
Screen Saver	Off : Do not use the screensaver.
Set the screensaver.	On : The screensaver function activates when stop or pause status
	continues for about three minutes.
Wallpaper	Picture : Displays the MARANTZ logo.
Set to display the background	Black : Set the background to black.
while playback is stopping.	Gray : Set the background to gray.
	Blue : Set the background to blue.
Still Mode	Automatic : Display automatically using “Field” or “Frame” per the still
Set image quality during	image information.
pause.	Field : Set when there is a blurred image when “Automatic” image display
	is set.
	Frame : Set to display non moving images in high resolution.
Slide Show Time	3 ~ 5 ~ 100sec : This sets the display time per frame of a JPEG
Sets the display time of	slideshow playback.
JPEG
Temporary Display	Off : Do not temporarily display operations.
When the display is set to	On : Temporarily display operations.
“Off” by the Dimmer Control
(vpage 49) or Pure Direct
Function (vpage 40), this
sets it to temporarily display
operations received.
Captions	Off : Do not output the closed caption (subtitle) signal.
This setting output a subtitles	On : Output the closed caption (subtitle) signal.
signal to a closed caption
decoder (sold separately).

	Other Setup				Default settings are underlined.
	Set other items.
	Setting items				Setting contents
Auto Power Mode				Off : Do not use auto power mode.
This	setting	automatically		On : This setting automatically sets the power to standby if any of the
sets the power to standby.				following states continues for approximately 30 minutes.
				• Disc not loaded
				• Playback has stopped
				• Stopped due to resume function
Power Saving				Power Saving Standby : This is the lowest power consumption mode.
Set	power	saving	mode	During standby, operations are not accepted via HDMI control or RS-
during standby.				232C.
				Normal Standby : This is the low power consumption mode. During
				standby, operations are accepted via RS-232C but not accepted by HDMI
				control.
				HDMI Control Mode : Setting for turning the power on using an external
				device’s HDMI control function or by operation via RS-232C. Slightly
				higher power consumption.
				Quick Start Mode : Start up time is faster but power consumption during
				standby is higher.
Remote Control			Setting	GRemote IDH
(Main unit side)				Switches the UD9004’s remote control ID code when other MARANTZ
Set the remote control.				BD Players are in the vicinity.
				• BD 1 : Set the code setting on the remote control to “1” (vpage 7
				“Remote Control Setting (Remote Control Side)”).
				• BD 2 : Set the code setting on the remote control to “2” (vpage 7
				“Remote Control Setting (Remote Control Side)”).
BD Data Utility				BD Data Erase : Erases both internal memory and SD Memory Card
Erases data on SD Memory				storage.
Card, and initializes cards.				Initialize SD Card : Initialize the SD card to be used for the Bonus View
				function.

NOTE

•Insert or remove a SD Memory Card while the power is in standby.

If you insert a SD Memory Card while the power is ON, the SD Memory Card may not be read.

•The SD card used for the Bonus View function must have a capacity of 1GB or greater. Also the SD card must be initialized on the UD9004.

•This operation will delete all the data. Do not perform this operation when an SD card containing MP3 or JPEG data is inserted.

32

Remote control operation	SET UP	:Displaying the menu	d f 0 1	:Moves the cursor	ENTER :Decision the setting	RETURN :Return to previous menu
buttons		Cancel the menu		(Up/Down/Left/Right)