Marantz UD9004 Hdmi Auto Dual, w Hdmi Auto Independent connection, AV Pure Direct connection

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci

ENGLISH

q“HDMI Auto (Dual)”, w “HDMI Auto (Independent)” connection

AV Amp 1 or		AV Amp 2 or
TV 1		TV 2
HDMI		HDMI
	IN		IN

e“AV Pure Direct” connection

TV		AV Amp
HDMI		HDMI
	IN		IN

nAbout Video Signal

When “About HDMI Video Resolution Setting” (vpage 15) is set to “Auto”, of the resolution supported by both connected devices, the video signal of the highest resolution is output to both devices. (From the HDMI 2 terminal, audio signal and black video signal are output.)

r “HDMI 1”, t “HDMI 2” Connection

GExampleH “HDMI 1” connection

AV Amp or

TV

HDMI

IN

yDuring “HDMI Off”

Audio/video is not output from the HDMI terminal.

1. Home Theater Playback – Playing Back Using Multi-channel System –

nConnection to a device with a DVI-D terminal

If you use a HDMI/DVI-D conversion cable (sold separately), HDMI video signals are converted to DVI- D signals, enabling connection to a device with a DVI-D terminal.

NOTE

•In this case, the audio signal is not output. Make the appropriate audio connections for your devices. (vpage 15 ~ 21).

•The video signal will be in RGB format.

•You cannot output to a DVI-D device that does not support HDCP (high-bandwidth digital content copyright protection system).

•Video may not be output depending on the combination of devices.

14